You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

Excess speed along Jane Morbey Road

Reported via desktop anonymously at 16:40, Friday 5 June 2026

Sent to Oxfordshire County Council and South Oxfordshire District Council less than a minute later. FixMyStreet ref: 9568772.

The 20mph speed limit is being regularly broken by cars, motorbikes and HGV's - especially those accessing the industrial units at the end of the road. HGV's access the site from 5am onwards and cause the house to shake. I am concerned that the speed at which some people drive along this rood, and due to the high number of parked vehicles, a pedestrian is at risk of being knocked over whilst crossing to access the Phoenix Trail.

Council ref: ENQ261103280

Updates

  • Thank you for your enquiry. This issue has been passed onto the relevant team for investigation.

    State changed to: Investigating

    Posted by Oxfordshire County Council at 16:40, Friday 5 June 2026

  • Thank you for your report. Speeding is becoming an increasing concern in many places within Oxfordshire and we work closely with Thames Valley Police (TVP) to try and address this and other traffic safety issues. Speeding concerns can also be reported direct to the Police, as they hold the enforcement powers. Whilst we can consider physical measures to help reduce speeds and increase compliance, we have to balance against other funding highway needs or be funded by third parties such as the Town Council. Any measures would need local Town and County Councillor support.

    I have also noted that Thame Town has a Community Speed Watch. You may with to contact them directly to discuss speeding in this area. They can be found here: https://www.thametowncouncil.gov.uk/ thame-community-speed-watch/

    State changed to: Investigation complete

    Posted by Oxfordshire County Council at 09:30, Monday

This report is now closed to updates from the public. You can make a new report in the same location.