You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

Potholes and broken road surface at the 90° bend.

Reported via desktop in the Pothole category by Bob Bending at 17:22, Wednesday 5 February 2025

Sent to Hampshire County Council less than a minute later. FixMyStreet ref: 7091951.

I reported this a year or so back and the repair must have been sub standard as it's just as bad again now. It's right on the bend where you don't need to be dodging pot-holes. Also there's one at the junction of Huntsmoor Road/Faulkener Link which is right where cyclists would be turning out of the link.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • State changed to: In progress

    Updated by Hampshire County Council at 09:36, Thursday 6 February 2025

  • State changed to: Action scheduled

    Updated by Hampshire County Council at 11:58, Friday 7 February 2025

  • State changed to: Open

    Updated by Hampshire County Council at 08:01, Monday 10 February 2025

  • State changed to: Action scheduled

    Updated by Hampshire County Council at 10:19, Friday 14 February 2025

  • No repair as yet. The surface of the road from the 90° bend to the junction with Mount Pleasant really needs resurfacing. It's currently just patch on patch on patch etc.

    Posted anonymously at 14:13, Monday 24 February 2025

  • State changed to: In progress

    Updated by Hampshire County Council at 15:18, Monday 24 February 2025

  • State changed to: Action scheduled

    Updated by Hampshire County Council at 12:23, Wednesday 26 February 2025

  • Still open, via questionnaire, 17:31, Wednesday 5 March 2025

  • Still not been fixed and getting wider and deeper. An accident waiting to happen.

    Posted anonymously at 15:32, Wednesday 12 March 2025

Only the original reporter may leave updates. If you made the original report please log in to leave an update.