Back to all reports

Street lights not working from Drayton Road roundabout down to Caldecott Close

Reported via mobile in the Street lighting category anonymously at 12:03, Friday 23 October 2020 using FixMyStreet Pro

Sent to Oxfordshire County Council less than a minute later

This issue has previously been reported on 16.10.2020 and there has still been no resolution. The problem was first noticed on 11.10.2020 None of the street lights are working from Drayton Road roundabout end of Caldecoot Road right down to Caldecott Close. This is problematic as it is very dark outside and as the evenings close in this means it is difficult to remain safe going outside after dark. I have mobility issues and my mother is 74 and putting the bins out yesterday after dark was very difficult, it is difficult for us to put bins out earlier due to living near the school and in the past people have inappropriately placed rubbish in our bins (if out early) which has resulted in them not being collected.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Ref: 00376901 Thank you for your report, this has been logged on our management system for repair, our contractors will aim to have this repaired within 7 working days. If it is found to be a supply fault this will be passed to the local DNO operator to attend.

    State changed to: Action scheduled

    Posted anonymously at 13:51, Friday 23 October 2020

  • Still out

    Posted anonymously at 20:46, Saturday 14 November 2020

  • Ref: 00376901

    The lights are still not fully fixed, some have been others have not

    Posted anonymously at 21:41, Monday

  • Thanks for using Fix My Street to record your problem. We are happy to report that your issue has now been addressed. If this is not the case and there is still an issue please report this via a NEW fix my street report. Thank you

    State changed to: Fixed

    Posted by Oxfordshire County Council at 09:57, Tuesday

This report is now closed to updates. You can make a new report in the same location.