Aerial map
You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new
report here Reposition
report here
Back to all reports

County Border Sign

Reported in the Other (non-highways) category anonymously at 11:26, Tue 7 November 2017

Sent to East Hampshire District Council and Hampshire County Council 4 minutes later. FixMyStreet ref: 1140134.

Deanlane End is missing the county border sign between Hampshire and West Sussex. The "Welcome to Hampshire" sign is missing. The sign has be missing for several years.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • Enquiry Reference: 21322288

    Enquiry Type: Other Hway Mgt

    Location: DEAN LANE

    The enquiry you raised has been inspected. As it does not present a hazard to highway users it does not require action at this time.

    Adopted roads in Hampshire are routinely inspected at regular intervals. The issue will be monitored and any future maintenance requirements will be identified as part of this process.

    Further information on our routine inspection policy can be found by clicking on the link below: https://www.hants.gov.uk/ transport/ roadmaintenance/ highwaysassets

    This email has been automatically generated so please do not reply to this message.

    If you need to contact us, please visit our website or call us on 0300 555 1388 and quote the above reference number in any correspondence relating to this issue.

    Typical useless response from Hampshire County Council - correct, it is not a safety issue, but there was once a border sign, I just want it replaced! Are it costs money - I see you want to waste it somewhere else!

    Posted anonymously at 17:19, Mon 13 November 2017

  • 14 December 2019 and the county boundary sign, "Welcome to Hampshire" has still not been defined.

    Posted anonymously at 10:02, Sat 14 December 2019

Only the original reporter may leave updates. If you made the original report please log in to leave an update.